Maybe a few days late to help but the machine is looking for the Y axis limit sensor
You can just press stop on the control panel .
Search found 322 matches
- Mon Aug 28, 2017 9:06 pm
- Forum: Help or advice required please
- Topic: Rotary engraving set up
- Replies: 3
- Views: 5521
- Tue Apr 04, 2017 9:47 pm
- Forum: Help or advice required please
- Topic: HX3040 USB machine - help with drivers on Windows 10
- Replies: 6
- Views: 8074
Re: HX3040 USB machine - help with drivers on Windows 10
Hi Fifty
The old type 3040's look like the 3020's but bigger
The new model of 3040's look more like 3060's
the very early one's were white and blue but most are red and white
if you can get Newlydraw to work on windows 10 i have no idea
The old type 3040's look like the 3020's but bigger
The new model of 3040's look more like 3060's
the very early one's were white and blue but most are red and white
if you can get Newlydraw to work on windows 10 i have no idea
- Fri Mar 31, 2017 8:34 pm
- Forum: General Discussion
- Topic: Old Tube, Curious Discovery
- Replies: 4
- Views: 6523
Re: Old Tube, Curious Discovery
Most timber, ply and mdf cuts better with less power
- Tue Feb 28, 2017 9:57 am
- Forum: Help or advice required please
- Topic: 4 Mirror Alignment Nightmare
- Replies: 5
- Views: 6041
Re: 4 Mirror Alignment Nightmare
The first mirror is just to get the beam into the cabinet and normally doesn't need moving
And Dave is right you might need to shim the 4th mirror
Its a long time since i have seen a old style 3040 but i think you need a 5.5mm spanner and a couple cups of tea
And Dave is right you might need to shim the 4th mirror
Its a long time since i have seen a old style 3040 but i think you need a 5.5mm spanner and a couple cups of tea
- Wed Jan 11, 2017 6:45 pm
- Forum: Help or advice required please
- Topic: Laser Bangs against side
- Replies: 4
- Views: 5636
Re: Laser Bangs against side
Make sure your machine is datumed if it doesn't on start up
- Mon Dec 26, 2016 11:15 pm
- Forum: Help or advice required please
- Topic: Still no joy
- Replies: 2
- Views: 4044
Re: Still no joy
Hi Alison
If your mirrors and lens are clean and your alignment is ok then it will probably be new tube time
If your mirrors and lens are clean and your alignment is ok then it will probably be new tube time
- Wed Dec 14, 2016 6:48 pm
- Forum: Help or advice required please
- Topic: Wool felt or synthetic?
- Replies: 8
- Views: 9725
Re: Wool felt or synthetic?
wool stinks really bad, but not has bad has stingray skin
- Tue Nov 29, 2016 7:51 pm
- Forum: Help or advice required please
- Topic: round and round it goes
- Replies: 1
- Views: 3452
Re: round and round it goes
Hi Tim
The rotary for the 3060 is a chuck type Don't know the size
It plugs into the Y axis simple unplug and plug in (machine should be turned off for this)
Yes you have too change the pulse setting (there is a formula for this)
Hope this helps
The rotary for the 3060 is a chuck type Don't know the size
It plugs into the Y axis simple unplug and plug in (machine should be turned off for this)
Yes you have too change the pulse setting (there is a formula for this)
Hope this helps
- Mon Nov 28, 2016 7:58 pm
- Forum: General Discussion
- Topic: Laser pointer not working
- Replies: 7
- Views: 8464
Re: Laser pointer not working
I know but had to check
only thing i can suggest is retest sorry
only thing i can suggest is retest sorry
- Mon Nov 28, 2016 7:46 pm
- Forum: General Discussion
- Topic: Laser pointer not working
- Replies: 7
- Views: 8464
Re: Laser pointer not working
Hi
Have you put the wires the right way
Have you put the wires the right way