Search found 5 matches
- Wed Feb 08, 2012 9:31 am
- Forum: Help or advice required please
- Topic: HX3040
- Replies: 20
- Views: 24572
Re: HX3040
Does anyone want to buy an HX3040? It's in good nick. Just needs software! lol
- Tue Feb 07, 2012 2:15 pm
- Forum: Help or advice required please
- Topic: HX3040
- Replies: 20
- Views: 24572
Re: HX3040
Windows XP with SP2.
It's not sharing any IRQ's.
I have no driver files, should there be a driver installed for the laser?
When I connect the machine to the parallel port, windows doesn't show any new device connected!
Mark
It's not sharing any IRQ's.
I have no driver files, should there be a driver installed for the laser?
When I connect the machine to the parallel port, windows doesn't show any new device connected!
Mark
- Tue Feb 07, 2012 11:34 am
- Forum: Help or advice required please
- Topic: HX3040
- Replies: 20
- Views: 24572
Re: HX3040
I have found an old PC with a parallel port, it is set as per the following;
Type = ECP
Name = LPT1
I/O = 0378-037F
IRQ = 7
DMA = 03
When I run NewlyDraw, there are still no options for my machine.
Any ideas?
Mark
Type = ECP
Name = LPT1
I/O = 0378-037F
IRQ = 7
DMA = 03
When I run NewlyDraw, there are still no options for my machine.
Any ideas?
Mark
- Tue Feb 07, 2012 9:59 am
- Forum: Help or advice required please
- Topic: HX3040
- Replies: 20
- Views: 24572
Re: HX3040
Hi,
Thank you for all of your comments.
What if used a new(ish) PC but put a PCI Parallel board in it. Lindey or similar. The settings on them can be configured the same as on M/B ports.
Has anyone any experience using PCI Ports with this type of Laser?
Regards,
Mark
Thank you for all of your comments.
What if used a new(ish) PC but put a PCI Parallel board in it. Lindey or similar. The settings on them can be configured the same as on M/B ports.
Has anyone any experience using PCI Ports with this type of Laser?
Regards,
Mark
- Mon Feb 06, 2012 4:03 pm
- Forum: Help or advice required please
- Topic: HX3040
- Replies: 20
- Views: 24572
HX3040
Hi, Can anyone please advise me on the following issue; I have purchased an old HX3040 laser cutter/engraver, but it came without any software. I have the 'NewlyDraw' dongle and I have downloaded NewlyDraw 1.5, which runs fine. My PC is connected to the HX3040 using a USB-to-Parallel adapter cable. ...