Laserscript user forum

Hi Tom i cant detect any wobble in the head unit and ive changed the speed settings dropping them down to same settings as my little 6090 cuter but not made any difference after its done the draws lines (13 power and 30 speed) on the wood then moves onto the cut lines they end up about 3mm too high ...

Hi DiySurgeon did you buy your second hand one from same place as me in Skegness ? ive paid for a visit from HPC still waiting for thm to contact me with an appointment date bad news with my machine is i have flagged more faults up on it any comments or advise from you guys would be great i can get ...

hi all has anyone done an upgrade of there stepper motors to faster servo motors ? ive recently purchased a second hand 90120 with a 150w tube upgrade i was advised by the seller that i could cut at speeds of around 35 for 3mm mdf , but im not happy with how jagged the cut is, is it just worn out be...

hi guys still no luck ive checked the power setting ad its at 100% i cant see any air bubbles in the tube i have a wooden square that came with the machine to set the focal depth correctly ive put a piece of tape on the end of the laser and it seems to be firing through the center ok think ive run o...

hi guys thanks for comenting i already have a 6090 with a 60w tube and im using the same wood on that fine on the 6090 im cutting 3mm mdf at 20 speed at 80% so this one is cutting better then the new 150w this one had an alignment cleat dot of around 2mm, is this because its only a 60w tube ? one th...

hi
yes works fine on windows 8 and 10 i have tried both
the explanation how is on the f,a,q and advise section on here

Hi all just bought a second hand 90120 with a 150w 10,000 hours tube upgrade the seller showed me it cutting 3mm mdf at 35 speed at 95% power now i have it home best i can get it to cut is 18 speed at 95% and to me the cut looks like a wide and an over burnt cut ive played about with the alignment o...