I would call them and check - I would not expect the bolts to have loosened so quick. I may be ok but best check it case it has knocked it out of alignment.
Best
Dave
Search found 1611 matches
- Sun Mar 07, 2021 7:11 pm
- Forum: Help or advice required please
- Topic: Laser not working an part of the bed
- Replies: 7
- Views: 5632
- Sun Mar 07, 2021 8:39 am
- Forum: Help or advice required please
- Topic: Laser not working an part of the bed
- Replies: 7
- Views: 5632
Re: Laser not working an part of the bed
Just downloaded the videos - the bar should not be lose like that so there is something wrong/loose on the carriage. The machine looks hardly used so doubt it is the bearings so suspect something has come loose or broken. It is earlier than mine so not quite sure how it is built on yours - maybe tak...
- Sun Mar 07, 2021 8:29 am
- Forum: Help or advice required please
- Topic: Laser not working an part of the bed
- Replies: 7
- Views: 5632
Re: Laser not working an part of the bed
Sadly the videos don't run - the page opens but when try to play it just sits waiting.
It sounds like a belt or bearing issue - also check the datum switches aren't loose.
With the machine off the head should move smoothly - there is a bit of resistance but not a lot.
Best
Dave
It sounds like a belt or bearing issue - also check the datum switches aren't loose.
With the machine off the head should move smoothly - there is a bit of resistance but not a lot.
Best
Dave
- Sat Mar 06, 2021 7:46 pm
- Forum: Help or advice required please
- Topic: Laser not working an part of the bed
- Replies: 7
- Views: 5632
Re: Laser not working an part of the bed
What machine and software version?
So the head moves ok when the machine is off and returns to datum when you turn it on?
Does it do it on all files or a simple text file?
You can post a video to a hosting site and post a link here
Best
Dave
So the head moves ok when the machine is off and returns to datum when you turn it on?
Does it do it on all files or a simple text file?
You can post a video to a hosting site and post a link here
Best
Dave
- Sat Mar 06, 2021 11:11 am
- Forum: General Discussion
- Topic: One compressor, two lasers?
- Replies: 4
- Views: 4965
Re: One compressor, two lasers?
No - regulator then y splitter then one of these for each machine
Remember though I am using it as an open system so turn of the flow from the compressor valve.
I do drain the compressors when I remember but not had an issue with condensation reaching the work.
Best
Dave
Remember though I am using it as an open system so turn of the flow from the compressor valve.
I do drain the compressors when I remember but not had an issue with condensation reaching the work.
Best
Dave
- Sat Mar 06, 2021 8:04 am
- Forum: General Discussion
- Topic: One compressor, two lasers?
- Replies: 4
- Views: 4965
Re: One compressor, two lasers?
I did for a while on my two 3060's - apart from having to kick in more often it worked ok.
Best
Dave
Best
Dave
- Wed Mar 03, 2021 4:50 pm
- Forum: Help or advice required please
- Topic: Air Compressor, Solenoid, etc
- Replies: 6
- Views: 5336
Re: Air Compressor, Solenoid, etc
Can you pm me the details for the solenoid (not allowed to post custom mods).
The instruction were in the book that came with the compressor - if if did not get one I can scan mine
Cheers
Dave
The instruction were in the book that came with the compressor - if if did not get one I can scan mine
Cheers
Dave
- Wed Mar 03, 2021 3:18 pm
- Forum: Help or advice required please
- Topic: Air Compressor, Solenoid, etc
- Replies: 6
- Views: 5336
Re: Air Compressor, Solenoid, etc
As said I don't bother and just turn the valve open before hitting start and turn of after. You can adjust the duty cycle on the compressor to give a slightly longer time between cycles as you are aiming for air flow rather than pressure. I use an inline valve near the laser to help control the flow...
- Tue Mar 02, 2021 1:10 pm
- Forum: Help or advice required please
- Topic: Air Compressor, Solenoid, etc
- Replies: 6
- Views: 5336
Re: Air Compressor, Solenoid, etc
Ask HPC - personally I turn the compressor on manually - a lot easier
Best
Dave
Best
Dave
- Sun Feb 28, 2021 4:55 pm
- Forum: Help or advice required please
- Topic: Strange tracing problem with Inkscape?
- Replies: 3
- Views: 4369
Re: Strange tracing problem with Inkscape?
If you wanted to pm me the file I can have a look.
Converting from AI is a pain and explaining it to customers who don't understand is the bane of my life!
Best
Dave
Converting from AI is a pain and explaining it to customers who don't understand is the bane of my life!
Best
Dave