Engraving looks jagged

Moderators: HPC, Daven

Post Reply
HMan
Posts: 3
Joined: Sat Jul 15, 2017 10:59 pm
Contact:

Engraving looks jagged

Post by HMan »

Hi guys,

I've been using the Laserscript 3020 for a year now and this is the first time this has ever happened. Its regularly cleaned and was just cleaned before doing this engrave but its came out unusable and I've never seen this happen before?

Image

Any ideas what I've possibly done wrong?

Thanks in advance
Steve
Daven
Posts: 1632
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

Re: Engraving looks jagged

Post by Daven »

Check everything is secure - the older 3020 had nylon wheels running under the carriage, make sure they are ok. Check the lens and mirrors aren't moving as well.

Does it do it on slower speeds?

Cheers
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 2 guests