immediate having no effect

Moderators: HPC, Daven

Post Reply
jim
Posts: 9
Joined: Wed Apr 18, 2012 4:46 pm
Contact:

immediate having no effect

Post by jim »

Hi all,
We have a LS 6090 running on windows 7 - Lasercut 5.3. The 'immediate' box when ticked would allow us to cut/engrave and start from whereever we moved the target point.
A couple of days ago this ceased to be the case. Now it always goes back to the 'home' position and starts cutting from there.
This happens wether the immediate box is ticked or not ticked.

Any ideas?


I have tried the obvious things - switching off and on again, pressing the datum button and saving the file each time.


Jim
Tom
Posts: 322
Joined: Mon Sep 19, 2011 6:15 pm
Contact:

Re: immediate having no effect

Post by Tom »

Hi Jim
try download CFG left hand side of the download current button
jim
Posts: 9
Joined: Wed Apr 18, 2012 4:46 pm
Contact:

Re: immediate having no effect

Post by jim »

Thanks Tom, worked a treat!
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests