LaserCut 5.3 Shortcuts

Moderator: Admin

llamalasers
Posts: 155
Joined: Thu Apr 03, 2014 10:17 pm
Contact:

LaserCut 5.3 Shortcuts

Postby llamalasers » Thu Apr 06, 2017 9:56 am

Just accidentally discovered that ctrl+G opens the size/scale options in LaserCut.
This will shave seconds off my processing times so thought I'd share.

Any other useful LaserCut shortcuts?
60W LS6840, CW4000 & BOFA AD Oracle
started out with LS3040

Daven
Posts: 1243
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

Re: LaserCut 5.3 Shortcuts

Postby Daven » Thu Apr 06, 2017 11:25 am

Shift J = pick
Ctrl Y = centre to table
Zoom out = F3
Zoom to objects = F4
Zoom to Table shift = F4
Array F9

They are noted in the menus ;)
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC

llamalasers
Posts: 155
Joined: Thu Apr 03, 2014 10:17 pm
Contact:

Re: LaserCut 5.3 Shortcuts

Postby llamalasers » Sun May 07, 2017 2:12 pm

Daven wrote:They are noted in the menus ;)



:oops:

Sometimes I overlook the most obvious things.
60W LS6840, CW4000 & BOFA AD Oracle
started out with LS3040

Daven
Posts: 1243
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:

Re: LaserCut 5.3 Shortcuts

Postby Daven » Sun May 07, 2017 7:56 pm

:D me too ;)
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC


Return to “Useful Information Quick reference”

Who is online

Users browsing this forum: No registered users and 1 guest