Hi does anyone know how to adjust the start position of a LS3060 cutter/ engraver. It seems by default to start in the middle of the bed every time.
Any help or advice would be much appreciated.
Gary
Laser starting position
Re: Laser starting position
Newlydraw or laserscript Gary?
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Dave@OpticalPower.co.uk
Dave@OpticalPower.co.uk
Re: Laser starting position
Laserscript 5.3
Re: Laser starting position
On the control window you have a checkbox saying "Immediate"
make sure that is selected and the laser will start from whatever point it is at.
best wishes
Dave
make sure that is selected and the laser will start from whatever point it is at.
best wishes
Dave
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Dave@OpticalPower.co.uk
Dave@OpticalPower.co.uk
Re: Laser starting position
Thanks Dave
I'll give that a buzz.
I'll give that a buzz.
Who is online
Users browsing this forum: No registered users and 2 guests