Heard of Newly Engrave but not Laser cut engrave!Tom wrote:I've only had a quick look at 6.1
But Laser cut engrave deferentially isn't it
And yes can't use 5.3 files with 6.1
I had a copy of Laser cut engrave on this pc but can't find it, Dam w10
HPC ls 6450 software .
Re: HPC ls 6450 software .
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Re: HPC ls 6450 software .
If you've used lasercut 5.0 its like that
But it's been that long since i've used 5.0 (7/8 years) i can't rely remember
But it's been that long since i've used 5.0 (7/8 years) i can't rely remember
-
- Posts: 26
- Joined: Wed Aug 27, 2014 12:36 pm
- Location: Glenrothes Fife
- Contact:
Re: HPC ls 6450 software .
Thank's guys this is what is putting me off buying the LS6540 not a lot known about the software or the machine .
Re: HPC ls 6450 software .
Sorry Bella, best give HPC a call
I only know of Lasercut 6.1 with no dongle but as Tom suggests there is another version lurking about. They are all similar though
Best
Dave
I only know of Lasercut 6.1 with no dongle but as Tom suggests there is another version lurking about. They are all similar though
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
- Posts: 26
- Joined: Wed Aug 27, 2014 12:36 pm
- Location: Glenrothes Fife
- Contact:
Re: HPC ls 6450 software .
Think i am just going to wait until a second hand Hpc comes along .Thanks for all you help .
-
- Posts: 26
- Joined: Wed Aug 27, 2014 12:36 pm
- Location: Glenrothes Fife
- Contact:
Re: HPC ls 6450 software .
Well after thinking and thinking i posted in various other sites with threads going and coming regarding the ls6450. Dalton Sheldrake made my mind up for his explanation on laser cut engrave software . The software is basic laser cut 5.3 with some things missing that nobody uses like offset . So i have ordered one. So ls6450 arrives with upgraded 40watt tube 1st week of January .
Re: HPC ls 6450 software .
Glad you have made your mind up Bella
-
- Posts: 26
- Joined: Wed Aug 27, 2014 12:36 pm
- Location: Glenrothes Fife
- Contact:
Re: HPC ls 6450 software .
Thanks Tom we had a ls3040 pro for over a year and was a really good machine . The only thing that was putting me off the ls 6450 was the software and dsp but after speaking to Dalton on an other page my mind was made .
Re: HPC ls 6450 software .
Hi Bella
Most of the laser software you find are mostly the same
The only one i know on that facebook page that has used lase cut engrave is Steve lalor
Have a word With him
Most of the laser software you find are mostly the same
The only one i know on that facebook page that has used lase cut engrave is Steve lalor
Have a word With him
Who is online
Users browsing this forum: No registered users and 5 guests