Balsa Wood

Moderators: HPC, Daven

Post Reply
gsace
Posts: 8
Joined: Wed Oct 19, 2016 2:18 pm
Contact:
Contact gsace

Balsa Wood

Post by gsace »

I'm am wondering if anyone cuts Balsa Wood 0.08 and how does it cut? Thanks in advance for taking the time to reply
Top
Daven
Posts: 1632
Joined: Fri Oct 15, 2010 6:44 pm
Location: Devon
Contact:
Contact Daven

Re: Balsa Wood

Post by Daven »

Last time I tried (not that thin though) it burned quite well - needs good air assist ;)

Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Top
gsace
Posts: 8
Joined: Wed Oct 19, 2016 2:18 pm
Contact:
Contact gsace

Re: Balsa Wood

Post by gsace »

Thank you for your reply. Will give it a go and maybe weight it down so that it doesn't warp etc.
Top
Post Reply

Return to “Help or advice required please”

Who is online

Users browsing this forum: Ahrefs [Bot], Semrush [Bot] and 1 guest