Water not flowing immediately
Water not flowing immediately
Any idea why the water doesn't flow immediately when I turn on the laser and chiller. After about 5 mins the water starts flowing and only then will the laser start firing. We have had a problem with a blockage before in this machine but when the water does start flowing it works fine?
Re: Water not flowing immediately
Could be the pump failing - could be the flow sensor blocked.
What water do you use and do you add anything to it?
Best
Dave
What water do you use and do you add anything to it?
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Re: Water not flowing immediately
Thanks for reply. De-ionised and we change it every few months. We don't add anything to it. Is the pump inside the chiller or is it the separate pump that looks like a fish tank pump?
Re: Water not flowing immediately
Depends on the chiller - but normally the pump is submersed in the water tank if not incorporated in the chiller.
Best
Dave
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Who is online
Users browsing this forum: No registered users and 1 guest