Hi, I was wondering if anyone had any simple plans for a cog cutting file suitable for cutting on my LS3050? I also use Corel.
I am going to a Steampunk themed event this weekend and would like some for decoration, they do not need to funtion.
Thanks in advance, Nicola
Cog cutting file
Re: Cog cutting file
Let me know what sizes and I'll run up some drawings for you
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Dave@OpticalPower.co.uk
Dave@OpticalPower.co.uk
Re: Cog cutting file
Hello
You can make some in this and then download them as a plt that will import into laser cut5.3.
http://woodgears.ca/gear_cutting/template.html
Regards
Mathew
You can make some in this and then download them as a plt that will import into laser cut5.3.
http://woodgears.ca/gear_cutting/template.html
Regards
Mathew
Re: Cog cutting file
Have you tried Inkscape which is free software this has an excellent cog creation utility.
-
- Posts: 152
- Joined: Sun Jan 18, 2015 6:38 pm
- Contact:
Re: Cog cutting file
I found these resources...
http://geargenerator.com/ outputs svg files...
http://woodgears.ca/gear/ (this is really useful as you can add spokes etc) It is worth the purchase price if you are going to be working with gears (I purchased it a few years ago)
http://geargenerator.com/ outputs svg files...
http://woodgears.ca/gear/ (this is really useful as you can add spokes etc) It is worth the purchase price if you are going to be working with gears (I purchased it a few years ago)
LS3060 PLUS with a 60w tube, Chiller and Bofa filter
Online Store http://www.t2kreations.co.uk
Personal Website... http://www.timbobtastic.com
Online Store http://www.t2kreations.co.uk
Personal Website... http://www.timbobtastic.com
Who is online
Users browsing this forum: No registered users and 1 guest