advice please
-
- Posts: 30
- Joined: Sun Mar 13, 2016 8:58 am
- Contact:
advice please
Hi everyone
Can anyone tell me why when I start laserscript I am getting a box which says Laser output top left then temporary file failed! [C:\LaserCut53\\laser.ECP] I click it off and another comes up I click that off then laserscript will come up like normal. But when I try to do things like normal to cut a shape I can't change my settings for my power and speed etc. Help
Can anyone tell me why when I start laserscript I am getting a box which says Laser output top left then temporary file failed! [C:\LaserCut53\\laser.ECP] I click it off and another comes up I click that off then laserscript will come up like normal. But when I try to do things like normal to cut a shape I can't change my settings for my power and speed etc. Help
Re: advice please
Hi
Has lasercut done this all the time ?
What windows are you running 7/8/10 xp
Tom
Has lasercut done this all the time ?
What windows are you running 7/8/10 xp
Tom
Re: advice please
Try renaming the file [C:\LaserCut53\\laser.ECP] to [C:\LaserCut53\\laser.oldECP]
AFAIK the ecp file is not required so may be confusing the startup process.
Best
Dave
AFAIK the ecp file is not required so may be confusing the startup process.
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
- Posts: 30
- Joined: Sun Mar 13, 2016 8:58 am
- Contact:
Re: advice please
Hi Tom
No it's been absolutely fine, and I'm on windows 10, I've just used my machine which is ok as I used one of the files which is already loaded.
No it's been absolutely fine, and I'm on windows 10, I've just used my machine which is ok as I used one of the files which is already loaded.
-
- Posts: 30
- Joined: Sun Mar 13, 2016 8:58 am
- Contact:
Re: advice please
Hi Dave
Sorry, how do I rename that and what is a AFAIK I'm new to all this lol
Cheers Christine
Sorry, how do I rename that and what is a AFAIK I'm new to all this lol
Cheers Christine
Re: advice please
On Win 10 press the windows button on the keyboard, click on 'this pc'. Under Devices and drives - double click on OS (C:) (or it may just be C:). Find and double click on a folder called LaserCut53. Find the file called Laser.ECP, right click and rename.
AFAIK is acronym for 'As Far As I Know' - If the file is needed by you or someone else you can re-name it back.
Best
Dave
AFAIK is acronym for 'As Far As I Know' - If the file is needed by you or someone else you can re-name it back.
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
- Posts: 30
- Joined: Sun Mar 13, 2016 8:58 am
- Contact:
Re: advice please
Tried that Dave, still the same
-
- Posts: 30
- Joined: Sun Mar 13, 2016 8:58 am
- Contact:
Re: advice please
Tried that Dave, still the same
Re: advice please
Have you give hpc a call
If it was me i would reinstall laser cut but give hpc a call first
Tom
If it was me i would reinstall laser cut but give hpc a call first
Tom
Re: advice please
Has win10 updated
Who is online
Users browsing this forum: No registered users and 0 guests