Hi,
My bed on the software is the wrong size etc; how do you resize it ?
Thanks
LaserCut 5.3
Re: LaserCut 5.3
file, Machine Options, worktable
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
- Posts: 3
- Joined: Sat May 01, 2021 3:20 pm
- Contact:
Re: LaserCut 5.3
Got that thank you, I still seem to be off the bed area etc is there set config files for each machine for Laser Cut 5.3.. I'm a complete noob and should be ok once the software is set up.
It's a older desktop style 3040 pro I've bought second hand.
It's a older desktop style 3040 pro I've bought second hand.
Re: LaserCut 5.3
Hi - yes it should be part of the install disk - have you got it to transfer to the machine (if successful the machine will beep).
It may be worth calling HPC and getting the correct version for the card you have as well in case it is not the original disk.
Best
Dave
It may be worth calling HPC and getting the correct version for the card you have as well in case it is not the original disk.
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Who is online
Users browsing this forum: No registered users and 0 guests