Page 1 of 2
Box maker
Posted: Wed Mar 16, 2011 10:54 pm
by Daven
Just found
this web site. If you want a box plan on the quick the online version creates a PDF. I have not cut one yet but it look ok to me.
You can also download a stand alone version
here
Dave
Re: Box maker
Posted: Wed Mar 16, 2011 11:16 pm
by Spooky
Nice find Dave!!
I can take the vectors from a PDF file and generate a DXF. (PDF gfx are vectors) lemme see if I can write something up in C to do the work for us
really good find mate
best wishes
Dave
Re: Box maker
Posted: Thu Mar 17, 2011 8:06 am
by Daven
No probs - just a lucky browsing session
Cheers
Dave
Re: Box maker
Posted: Thu Mar 17, 2011 3:20 pm
by Ryddingsdale
Really good, how do I convert from adobe to a DXF file?
Re: Box maker
Posted: Thu Mar 17, 2011 3:29 pm
by Spooky
I'm working on a little program that will do it for you
In the meantime a program like Photoshop will open PDF files and save them as a JPG, from there use any of the simple Raster to Vector programs to generate your DXF.
best wishes
Dave
Re: Box maker
Posted: Thu Mar 17, 2011 3:57 pm
by Daven
Or until Dave's version is available - have a look at
http://anydwg.com/ PDF to DWG converter (also converts to DXF) free to use up to 3 files a time.
Dave
Re: Box maker
Posted: Wed Mar 30, 2011 9:22 am
by Ryddingsdale
Just tried convert from pdf to dxf, made a simple box 70mm x 30mm, converted into dxf file, imported file into laser software, but box was over 1400mm??
Any ideas?
regards
Dale.
Re: Box maker
Posted: Wed Mar 30, 2011 9:36 am
by Spooky
Hiya Dale,
Boxmaker creates files in imperial format, when converted to metric via raster to vector software it gets the scale wrong, usually by a factor of 10
I had the same problem, just rescale in your cad package
best wishes
Dave
Re: Box maker
Posted: Sat Apr 16, 2011 7:30 pm
by PhillyDee
I have had varying results with this! Doesn't seem to matter what sizes I specifiy in the box maker, it just outputs whatever it feels like!
And there is a scale factor setting in that converter, which just seems to confuse matters even further. That said, I had 2 partially successful boxes with it. One of which I had to hammer together, the other which sticks out at the joints as its only half the depth
. Even so, still 2 boxes!
Re: Box maker
Posted: Wed May 11, 2011 7:06 am
by tweakie
Perhaps the problems are related to the size of the box and the software just scales up the errors.
I made some small boxes with this software and had no problems at all with size or fit, perhaps I am just the lucky one.
Tweakie.