Hi One and All
Just gone to give my mirrors a clean and I noticed that where the laser hits the mirror I am getting what looks like an oil slick on top of water type colour fanning out in a sort of circular shape. Has anyone else seen this and do I need to start to panic about something.
Many Thanks
Mirrors
Mirrors
Colonel Blair
Not that technical I am afraid....
Not that technical I am afraid....
Re: Mirrors
Could be two things Tony. either localised heating of the mirror (if the machine is over say 2 years old) or burnt on rubbish from the air, Try distilled water to clean the mirror and dry with a cotton bud.
best wishes
Dave
best wishes
Dave
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Dave@OpticalPower.co.uk
Dave@OpticalPower.co.uk
Re: Mirrors
Thanks Dave. I cleaned them and it did come off and I have been cutting MDF of late so it could explain it. Also the machine is nearly two years old so it could be the heat on the mirrors. At least I don't have too panic just yet.
Thanks
Thanks
Colonel Blair
Not that technical I am afraid....
Not that technical I am afraid....
Who is online
Users browsing this forum: Ahrefs [Bot] and 2 guests