Page 1 of 1
laser cut pine
Posted: Tue Oct 11, 2011 9:46 am
by yoser
what is the speed and power to cut 15mm pine
Re: laser cut pine
Posted: Tue Oct 11, 2011 10:30 am
by Spooky
15mm???
What power laser tube?
15mm is a stretch for any laser system, it will burn rather than cut
best wishes
Dave
Re: laser cut pine
Posted: Tue Oct 11, 2011 10:50 am
by yoser
hi spooky the tube is 80w co2
Re: laser cut pine
Posted: Tue Oct 11, 2011 11:04 am
by Daven
Dunno - 100%, lowest speed and a fire extinguisher
Sorry I'll get me coat
What sort of shape and size/quantity are you looking at doing?
Dave
Re: laser cut pine
Posted: Tue Oct 11, 2011 11:20 am
by Pedro_Hernandez
I've cut 10mm pine on the HPC1290 at work, 98 power and 10 speed, it was like a hot knife through butter with little charring and acceptable kerf.
I'm talking about a very dry peice of pine that had been knocking about for 6 years though ,anything new and not kiln dried wouldnt cut half as well.
P.
Re: laser cut pine
Posted: Tue Oct 11, 2011 11:58 am
by yoser
ok thanks guys
trial nad error it will be
Re: laser cut pine
Posted: Tue Oct 11, 2011 5:44 pm
by PhillyDee
Pine is a very sappy wood as well! So probably find some manky residues on the bed.
As usual, baby wipes!
Re: laser cut pine
Posted: Tue Oct 11, 2011 11:02 pm
by avalonman
I cut thin pine all the time and the cleanup is extensive, baby wipes do work well and if you reheat the residue with a hot air blower it comes off easier