Hi, new user here,
We have purchased a LS 1290, and I'm after doing photo eching/engraving etc.
We use 2D design at the moment, but just wondering what you guys use?
Regards
Dale.
Software
-
- Posts: 26
- Joined: Mon Sep 06, 2010 11:46 am
- Location: Oswaldtwistle
- Contact:
Software
LS 1290 User & 3020 Owner
Re: Software
Hiya Dale,
Options include:
AutoCAD
Corel Draw
Photoshop,
Photograv,
The more likely ones would be PhotoGRAV and Corel to be honest, AutoCAD is really more for cutting or Vector work.
Chris sells PhotoGRAV and that really is what you will need for any serious photo etching work to convert your pictures to an etchable format (layout).
hope that helps
Best wishes
Dave
Options include:
AutoCAD
Corel Draw
Photoshop,
Photograv,
The more likely ones would be PhotoGRAV and Corel to be honest, AutoCAD is really more for cutting or Vector work.
Chris sells PhotoGRAV and that really is what you will need for any serious photo etching work to convert your pictures to an etchable format (layout).
hope that helps
Best wishes
Dave
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Dave@OpticalPower.co.uk
Dave@OpticalPower.co.uk
-
- Posts: 26
- Joined: Mon Sep 06, 2010 11:46 am
- Location: Oswaldtwistle
- Contact:
Who is online
Users browsing this forum: No registered users and 0 guests