Having got great advice the last time i had a problem i thought i would give you another go!
My machine cut out in the middle of a job and will not switch on again. This is the first time anything like this has happened so i have no idea what to check. Any suggestions
would be greatly appreciated.
Cheers.
Mick
LS6040-Loss of power.
-
mickthemagpie
- Posts: 29
- Joined: Fri May 14, 2010 5:30 pm
- Contact:
Re: LS6040-Loss of power.
Cut out as in no power at all? RCD on the back of the machine tripped?
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
mickthemagpie
- Posts: 29
- Joined: Fri May 14, 2010 5:30 pm
- Contact:
Re: LS6040-Loss of power.
Yes no power at all. Is the RCD button the green one next to the plug? I have tried pressing that in but no effect.
Re: LS6040-Loss of power.
Hi Mick
The RCD is in the cabinet with all the electronis onthe 6040
White with a blue switch on it ( just be careful )
There is a 6amp fastblow fuse in the socket where the mains power gose in
Tom
The RCD is in the cabinet with all the electronis onthe 6040
White with a blue switch on it ( just be careful )
There is a 6amp fastblow fuse in the socket where the mains power gose in
Tom
-
mickthemagpie
- Posts: 29
- Joined: Fri May 14, 2010 5:30 pm
- Contact:
Re: LS6040-Loss of power.
Tanks Tom, i'll give that a try tomorrow and let you know if it works!!! This really is a helpful place for problem solving.
Cheers
Mick
Cheers
Mick
-
mickthemagpie
- Posts: 29
- Joined: Fri May 14, 2010 5:30 pm
- Contact:
Re: LS6040-Loss of power.
Hi Tom, the RCD switch didnt work. It was pointing up when i checked so i moved it down. Still no power. The fuse you mention is that in the plug or actually on the machine?
Re: LS6040-Loss of power.
Hi Mick - I think you need to call HPC, at least they can tell you what Not to do. If the fuse has blown it may need investigating. Don't go getting electrified 
Best
Dave
Best
Dave
Using two LS3060's and an ex 3020 user
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
Please note I am not employed by HPC, any advice or recomendations I give are based on my own experience and are not necessarily the same as HPC's. First point of contact on any hardware issues should be with HPC
-
mickthemagpie
- Posts: 29
- Joined: Fri May 14, 2010 5:30 pm
- Contact:
Re: LS6040-Loss of power.
Sounds like good advice Dave!!
Re: LS6040-Loss of power.
Ah yes
That would be better
That would be better
-
mickthemagpie
- Posts: 29
- Joined: Fri May 14, 2010 5:30 pm
- Contact:
Re: LS6040-Loss of power.
Tom, HPC have also suggested the fuse but i haven't had time to check it yet, damned day job! Thanks for the advice.
Who is online
Users browsing this forum: Ahrefs [Bot] and 1 guest